B014 Amarante

Professional self-leveling builder gel, intended exclusively for professional use. Suitable for overlay, natural nail strengthening, extensions with forms or tips, as well as refills.

• Professional use only.
• May cause an allergic reaction.
• Avoid all contact with the skin and eyes.
• In case of eye contact, rinse immediately with clean water.
• Do not use on damaged or infected nails.
• Keep out of reach of children.
• Use in a well-ventilated area.

SKU : B014

Professional self-leveling builder gel, intended exclusively for professional use. Suitable for overlay, natural nail strengthening, extensions with forms or tips, as well as refills.

Nail Preparation

1. Disinfect the hands of the client and the professional.
2. Gently push back the cuticles.
3. Lightly mattify the surface of the natural nail using a 180 or 240 grit file.
4. Carefully remove all dust.
5. Apply a degreasing solution to clean and dehydrate the nail.
6. Apply a bonding agent if necessary, avoiding contact with the skin.

Using the Compressed Air Jar
The builder gel comes in a compressed air jar, ensuring optimal hygiene, precise dosing, and better product preservation.

Two methods of use are possible

1. By pressing: Press the cap to dispense the desired amount of gel. This method allows precise, fast, and waste-free dosing.
2. By unscrewing: Unscrew the jar for traditional brush use, according to professional habits.

The system limits air contact, reduces product loss, and allows the product to be used until the very end.

Application

1. Apply a thin layer of base gel, then cure under a lamp. LED 60 seconds, UV 120 seconds.
2. Take the required amount of builder gel.
3. Place the gel in the center of the nail.
4. Work the product gently with a brush.
5. Allow the gel to self-level naturally.
6. Build the desired architecture and apex.
7. Cure under a lamp. LED 60–90 seconds, UV 120 seconds.
8. Repeat the application if necessary to increase strength.

Finishing

1. Degrease the inhibition layer if necessary.
2. File to perfect the shape.
3. Carefully remove dust.
4. Apply color, nail art, or finishing gel.
5. Cure according to the product’s recommendations.

Product Removal

1. Removal is done mechanically, using a file or electric filing device.
2. Never forcibly remove the product to preserve the natural nail.

Storage Conditions

1. Store away from direct light. Close tightly after use.
2. Keep at room temperature, ideally between 15 and 25 degrees Celsius.

Our products do not contain HEMA or TPO.

INCI: Acrylates/Urethane Copolymer, Hydroxypropyl Methacrylate, Dimethyl Silylated Silica, 2,4,6-Trimethylbenzoyl-diphenylphosphine Oxide (TMO), Mica. MAY CONTAIN [+/-]: CI 15510, CI 14700, CI 47005, CI 60730, CI 77007, CI 61565, CI 77891.

For access to the MSDS, kindly contact us at contact@elegelli.com.